Want it on ? Order within
00 Hours
00 Minutes*
Price Match Promise
Have you seen this item for less elsewhere?
Description
A selection of rods introduced as part of Penn’s Tidal Surf Concept series. The Tidal XR range feature top of the range blanks built from premium 30T/40T carbon fibre, reinforced using an X wrapping process that gives a much lighter and slimmer rod. With additional benefits of decreased torsion and twisting improving distance and control when casting. All rods in the range have glow in the dark sensitive tip sections and come equipped with an X-shrink casting handle for a better grip.
Features
- Fuji Alconite K-Type guides
- 30T/40T High modulus carbon blank with X-Wrap technology
- Glow in the dark Sensitip for perfect bite registration
- Super slim and powerful blank
- Extreme distance casting properties
- X-Shrink casting grip
Specifications
- Model 1541074 - Length 4.20m - Power Medium/Heavy - C/Weight 100-250g
- Model 1541075 - Length 4.20m - Power Medium - C/Weight 100-225g
- Model 1541077 - Length 4.50m - Power Medium/Heavy - C/Weight 100-250g
- Model 1541078 - Length 4.50m - Power Medium - C/Weight 100-225g
Questions and Answers
Q
Could I use a multiplier reel ?
A
Hi Craig,
Its a fixed screw down reel seat rather than a sliding one. However if you wanted to use a multiplier then you probably can.
Regards
TackleUK
Q
i have this rod which i assembled to take a look at it. firstly the butt and middle sections did not go together. it was a poor fit. so i greased the 2nd section a little with vaseline and suddenly it shot into the butt section with a very firm connection. unfortunately i now have both sections fused together and i can't get them apart. have you any ideas on what i might do to get this rod to behave normally? sincerely, robert.
A
Hi Robert,
They often make the often make the joint slightly larger to increase the life expectancy of the rod, as it will ware away the more you use it, this is a common feature on rods, such as this. 'I'd recommend to make sure the rod is cool as this will help in loosening the sections and if possible, have a person on each end of the rod, twisting in opposite directions and this should allow the sections to become free.
Kind regards
Tackleuk
Q
i have this rod in medium power and 4.20m in length. the tip looks particularly frail. i'm concerned that trying to cast some distance with a 4 or 5oz weight might break this part of the rod. are my thoughts justified?
A
Hi Robert,
We'd recommend to keep within the casting weight for the rod and this should be ok.
Kind regards
Tackleuk
Q
Hi can you use a multiplier reel with these rods
A
Hi Peter,
The reel has a screw type reel fitting, so is more suited to fixed spool reels,
Kind regards
Tackleuk
Q
Hi, I am looking for an all-round rod for fishing mixed and clean ground on beaches and in larger estuaries. I am using 5-6oz leads +bait. I was looking at the 100-225g version of these rods, will it be suitable or should I look for something heavier? Thanks
A
Hi Rob,
Thank you for your message, we'd recommend something slightly heavier the 4.5M 100g-250g casting weight should be suitable for you.
Kind regards
Tackleuk
Q
what is the difference between a beach caster rod and a surfcasting rod?
A
Hi Robert,
Beach casters tend to be more heavy duty and used with a tri pod, where as surfcasting rods tend to be lighter and can be fished in your hand if you want to.
Kind regards
Tackleuk
Q
Is this rod designed for fixed spool reels
A
Hi Michelle,
These rods have a screw type reel fitting, more suited to fixed spool reels.
Regards
TackleUK
Q
Are the rods suitable for an off the ground cast ? Especially the 100-300 grams version
A
Hi Codfisher,
You should be fine to load these up with an off the ground style cast.
Regards
TackleUK
Loading...
Q
{{ question.question }}
A
{{ answer.answer }}
A
No answers have been submitted for this question.
Be the first to ask a new question
Loading...
Reviews
{{ review.headline }}
{{ review.review }}
Delivery
Estimated Delivery:
To
- Our system will provide you with an expected day of delivery when you checkout, but if you order before 1pm this item can be dispatched the same working day, orders placed after 3pm will usually be processed the next working day. Once the order has been dispatched it will either arrive with Royal Mail or DHL.
- We only dispatch Monday to Friday, so if you order after 3pm on Friday then your order will be dispatched on Monday.
- *Next day delivery is available if you select DHL Delivery or Royal Mail 24 at checkout. Please note that this is an estimate only and not a guaranteed service.
- For more information please see our Delivery Information.
